Komplektas Klipsch R-51PM aktyvios lentyninė garso kolonėlė aktyvios su USB-DAC su patefonu Audio Technika AT-LP3

The R-51PM powered speakers use a highly efficient, powerful yet minimalist design that engulfs listeners in their favorite movies and music. With a built-in amplifier, multitude of inputs and Bluetooth® connectivity, the R-51PM is the most versatile stereo speaker system on the planet.
Features:
Built-in All-Digital Amplifier
1" Aluminum LTS tweeters
90x90 Square Tractrix Horns
Dual 5.25" Spun-Copper IMG Woofers
Bass-Reflex via Rear-Firing Port
Strong, Flexible Removable Magnetic Grille
Dimensions: 13.3" x 7" x 8.5"

SYSTEM DESCRIPTION Powered Monitor (pair)

FREQUENCY RESPONSE 68Hz - 21kHz

DYNAMIC BASS EXTENSION 49Hz @ 35% Volume

MAX OUTPUT 107.3 dB

TOTAL SYSTEM POWER 120W Total System Power (140W Peak)

60W per channel cont. @ <%1 THD

HIGH FREQUENCY DRIVER 1” (2.5cm) Aluminum diaphragm compression driver mated

to 90° x 90° square Tractrix® horn

LOW FREQUENCY DRIVER 5.25” (13.3cm) copper spun magnetically shielded IMG woofer

CROSSOVER FREQUENCY 1663 Hz (Passive)

ENCLOSURE MATERIAL MDF

ENCLOSURE TYPE Bass-reflex via rear-firing port

INPUTS

• Bluetooth® wireless technology

• Phono/Line analog (with switch and ground screw terminal)

• 3.5mm analog mini jack

• USB digital

• Optical digital

OUTPUTS Single RCA line level output for connection to subwoofer

HEIGHT, WIDTH, DEPTH 13.3” (33.8 cm), 7” (17.78 cm), 9.12” (23.16 cm)

WEIGHT 10.6 lbs (4.8 kg)

FINISH Black

VOLTAGE 100V-240V 50/60Hz internal power supply with region specific

power cords

INCLUDED ACCESSORIES

• Remote control (with 2 x AAA batteries)

• 4M speaker wire with soldered tips

• 2M power cord (region specific)

• 2M USB Type A

Audio Technica AT-LP3  automatinis  stereo patefonas

AT-LP3 Advanced Fully-Automatic Belt-Drive Turntable

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

Balanced straight tonearm with hydraulically damped lift control and lockable rest

Built-in switchable phono/line pre-amplifier with attached dual RCA output cable

Switchable modes for moving magnet and moving coil cartridges

AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell

Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat

Damped base construction for reduced low-frequency feedback colouration

Type Fully Automatic, Belt-Drive Motor DC motor Speeds 33-1/3 RPM, 45 RPM Turntable Platter Die-cast aluminium Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz Signal-to-Noise Ratio > 60 dB Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 

“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec Phono Pre-Amp Gain 36dB nominal, RIAA equalised

56dB nominal, RIAA equalised Power Supply Requirements 220 to 240 V / 50, 60 Hz Power Consumption 2W Dimensions 435 mm ×353 mm×128 mm (W×D×H) Weight 5.2kg Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable*

Cartridge & Stylus

Model AT91R

Type VM Dual Magnet

Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)

Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)

Stylus Construction 0.6 mil bonded conical

Cantilever Aluminium pipe

Recommended Load Impedance 47,000 ohms

Weight 5.0g