ELECTRONIC SPECIFICATIONS
- POWER OUTPUT PER CHANNEL 50 Watts
- SPEAKER IMPEDANCE 8 Ohms
- RATED POWER BAND 20Hz to 20kHz
- TOTAL HARMONIC DISTORTION 0.005%
- INTERMODULATION DISTORTION
- 0.005% maximum, if the instantaneous peak power is 100 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20kHz
- DYNAMIC HEADROOM 1.5dB
- FREQUENCY RESPONSE +0,-0.5DB 20Hz to 20kHz
- FREQUENCY RESPONSE, +0, -3DB 10Hz to 100kHz
- SENSITIVITY (UNBALANCED) 300mV
- SENSITIVITY (BALANCED) 600mV
- MAXIMUM INPUT SIGNAL (UNBALANCED) 8V
- MAXIMUM INPUT SIGNAL (BALANCED) 16V
- SIGNAL TO NOISE RATIO 105dB
- INPUT IMPEDANCE (BALANCED / UNBALANCED) 25K/25K
- DAMPING FACTOR >150
- PREAMPLIFIER OUTPUT 3V (8V maximum)
- PREAMPLIFIER OUTPUT IMPEDANCE 500 Ohms
- VOLTAGE GAIN 36.5dB
- POWER GUARD <2% THD with up to 16dB overdrive at 1kHz
LOUDSPEAKER SPECIFICATIONS
- SYSTEM DRIVER COMPLEMENT One 4 inch Woofer/Midrange
- One 3/4 inch Dome Tweeter
- IMPEDANCE 8 Ohms Nominal
- FREQUENCY RESPONSE 60Hz - 45kHz
- SENSITIVITY 80dB (2.83V/1m equivalent)
- CROSSOVER FREQUENCY 2,000Hz
- POWER HANDLING 75 Watts
- ENCLOSURE FINISH High Gloss Black
- GRILLE FINISH Black Knit Cloth
DIGITAL AUDIO SPECIFICATIONS
- DIGITAL COAXIAL INPUT SAMPLE RATE 16Bit, 24Bit - 32kHz to 192kHz
- DIGITAL OPTICAL INPUT SAMPLE RATE 16Bit, 24Bit - 32kHz to 192kHz
- DIGITAL MCT (DIN) INPUT SAMPLE RATE 16Bit, 24Bit - 32kHz to 192kHz
- DIGITAL USB INPUT SAMPLE RATE 16Bit, 24Bit, 32Bit - 32kHz to 384kHz
HEADPHONE OUTPUT SPECIFICATIONS
- HEADPHONE POWER OUTPUT
- High Selection: 1W
- Normal Selection: 250mW
HEADPHONE OUTPUT IMPEDANCE
- 8-40 Ohms
- 40-150 Ohms
- 150-600 Ohms
CONNECTIVITY
- HEADPHONE OUTPUT 1 (1/4")
- HIGH LEVEL INPUTS UNBALANCED 1 Stereo
- HIGH LEVEL INPUTS BALANCED 1 Stereo
- DIGITAL COAXIAL INPUT 1
- DIGITAL OPTICAL INPUT 1
- DIGITAL MCT (DIN) INPUT 1
- DIGITAL USB INPUT 1
- PREAMPLIFIER OUTPUT 1 Stereo
CONTROL
- TONE CONTROLS
- 5 Step Bass Boost Control: 0 to +12.5dB (in 2.5dB steps) @ 40Hz
- POWER CONTROL INPUT Yes
- POWER CONTROL OUTPUT Yes
- GENERAL SPECIFICATIONS
- OUTPUT METERS Yes
- VACUUM TUBE OR SOLID STATE Solid State
- POWER REQUIREMENT 120V 50/60Hz, 1.5A
- STANDBY POWER REQUIREMENT <0.25 Watts
OUTPUT AUTOFORMER
- Yes for Headphones
WEIGHTS & DIMENSIONS
- DIMENSIONS (W X H X D) 59.1cm x 27.62cm x 48.3cm
- WEIGHT 22.6 kg
- SHIPPING WEIGHT 29.9 kg