Komplektas Klipsch R-51PM aktyvios lentyninė garso kolonėlė aktyvios su USB-DAC su patefonu Audio Technika AT-LP3

  • Sena kaina: 798.00 €
  • 649.00 €

The R-51PM powered speakers use a highly efficient, powerful yet minimalist design that engulfs listeners in their favorite movies and music. With a built-in amplifier, multitude of inputs and Bluetooth® connectivity, the R-51PM is the most versatile stereo speaker system on the planet.
Features:
Built-in All-Digital Amplifier
1" Aluminum LTS tweeters
90x90 Square Tractrix Horns
Dual 5.25" Spun-Copper IMG Woofers
Bass-Reflex via Rear-Firing Port
Strong, Flexible Removable Magnetic Grille
Dimensions: 13.3" x 7" x 8.5"


SYSTEM DESCRIPTION Powered Monitor (pair)
FREQUENCY RESPONSE 68Hz - 21kHz
DYNAMIC BASS EXTENSION 49Hz @ 35% Volume
MAX OUTPUT 107.3 dB
TOTAL SYSTEM POWER 120W Total System Power (140W Peak)
60W per channel cont. @ <%1 THD
HIGH FREQUENCY DRIVER 1” (2.5cm) Aluminum diaphragm compression driver mated
to 90° x 90° square Tractrix® horn
LOW FREQUENCY DRIVER 5.25” (13.3cm) copper spun magnetically shielded IMG woofer
CROSSOVER FREQUENCY 1663 Hz (Passive)
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass-reflex via rear-firing port
INPUTS
• Bluetooth® wireless technology
• Phono/Line analog (with switch and ground screw terminal)
• 3.5mm analog mini jack
• USB digital
• Optical digital
OUTPUTS Single RCA line level output for connection to subwoofer
HEIGHT, WIDTH, DEPTH 13.3” (33.8 cm), 7” (17.78 cm), 9.12” (23.16 cm)
WEIGHT 10.6 lbs (4.8 kg)
FINISH Black
VOLTAGE 100V-240V 50/60Hz internal power supply with region specific
power cords
INCLUDED ACCESSORIES
• Remote control (with 2 x AAA batteries)
• 4M speaker wire with soldered tips
• 2M power cord (region specific)
• 2M USB Type A

Audio Technica AT-LP3  automatinis  stereo patefonas

AT-LP3 Advanced Fully-Automatic Belt-Drive Turntable
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Balanced straight tonearm with hydraulically damped lift control and lockable rest
Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
Switchable modes for moving magnet and moving coil cartridges
AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
Damped base construction for reduced low-frequency feedback colouration


Type Fully Automatic, Belt-Drive Motor DC motor Speeds 33-1/3 RPM, 45 RPM Turntable Platter Die-cast aluminium Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz Signal-to-Noise Ratio > 60 dB Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec Phono Pre-Amp Gain 36dB nominal, RIAA equalised
56dB nominal, RIAA equalised Power Supply Requirements 220 to 240 V / 50, 60 Hz Power Consumption 2W Dimensions 435 mm ×353 mm×128 mm (W×D×H) Weight 5.2kg Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable*
Cartridge & Stylus
Model AT91R
Type VM Dual Magnet
Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
Stylus Construction 0.6 mil bonded conical
Cantilever Aluminium pipe
Recommended Load Impedance 47,000 ohms
Weight 5.0g

Susijusios prekės

Kaip užsakyti - technikos parduotuvė internete

Anksčiau peržiūrėtos prekės