HEADPHONE OUTPUT SPECIFICATIONS
Headphone Power Output 500mW
Headphone Output Impedance
- 32-100 Ohms
- 100-250 Ohms
- 250-600 Ohms
- 600-1,000 Ohms
ELECTRONIC SPECIFICATIONS
Power Output per Channel N/A
Speaker Impedance N/A
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion
- 0.5% maximum harmonic distortion at any power level from 250 milliwatts to rated power, 20Hz to 20,000Hz
- <0.20% at 1W, 20Hz to 20,000Hz
Intermodulation Distortion
- 0.04% Typical
- 0.4% Maximum
Dynamic Headroom 1.5dB
Frequency Response +0, -0.5dB from 20Hz to 20,000Hz
Sensitivity (Unbalanced) 1.0 Vrms
Sensitivity (Balanced) 2.0 Vrms
Maximum Input Signal (Unbalanced) 8V
Maximum Input Signal (Balanced) 16V
Signal To Noise Ratio 94dB
Input Impedance (Balanced / Unbalanced) 20K/10K
Damping Factor >150
Preamplifier Output N/A
Preamplifier Output Impedance N/A
Voltage Gain
- 12dB at 32 Ohms
- 17dB at 100 Ohms
- 21dB at 250 Ohms
- 25dB at 600 Ohms
Power Guard No
CONNECTIVITY
- Headphone Output
- One pair of 3-pin balanced XLR connectors for dedicated Left and Right balanced output;
- One 4-pin balanced XLR connector for balanced stereo output;
- One 1/4" stereo headphone jack
Balanced Input 1
Unbalanced Input 1
Digital AES/EBU Input 0
Digital Coaxial Input 0
Digital Optical Input 0
Digital MCT (DIN) Input 0
Digital USB Input 0
Preamplifier Output 0
DIGITAL AUDIO SPECIFICATIONS
Digital AES/EDU Input Sample Rate N/A
Digital Coaxial Input Sample Rate N/A
Digital Optical Input Sample Rate N/A
Digital MCT (DIN) Input Sample Rate N/A
Digital USB Input Sample Rate N/A
CONTROL
Tone Controls No
Power Control Input 1
Power Control Output 1
GENERAL SPECIFICATIONS
Output Meters No
Vacuum Tube or Solid State Vacuum Tube
Power Requirement 230V 50/60Hz, 1.5A
Standby Power Requirement <0.5 Watts
Output Type
Unity Coupled Output Transformer
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D)
15.6cm x 14.6cm x 23.2cm
Unit Weight 4.8 kg
Shipping Weight 5.5 kg

Anksčiau peržiūrėtos prekės
McIntosh MHA200 ausinių stiprintuvas
Kaina: 3,250.00 €