McIntosh MAC7200 stereo stiprintuvas, FM radijas, DAC, balansinė XLR išvestis. Galingumas 2x200W
ELECTRONIC SPECIFICATIONS
- POWER OUTPUT PER CHANNEL 200 Watts
- NUMBER OF CHANNELS 2
- SPEAKER IMPEDANCE 2, 4, or 8 Ohms
- RATED POWER BAND 20Hz to 20kHz
- TOTAL HARMONIC DISTORTION 0.005%
- DYNAMIC HEADROOM 2dB
- FREQUENCY RESPONSE +0,-0.5DB 20Hz to 20kHz
- FREQUENCY RESPONSE, +0, -3DB 10Hz to 100kHz
- SENSITIVITY PHONO (MOVING COIL) 0.25mV
- SENSITIVITY PHONO (MOVING MAGNET) 2.5mV
- SENSITIVITY HIGH LEVEL (BALANCED / UNBALANCED) 0.5V/0.25V
- SENSITIVITY (POWER AMP INPUT) 1.4V
- SIGNAL TO NOISE RATIO (MOVING COIL) 80dB
- SIGNAL TO NOISE RATIO (MOVING MAGNET) 82dB
- SIGNAL TO NOISE RATIO (HIGH LEVEL) 95dB
- SIGNAL TO NOISE RATIO (POWER AMP INPUT) 113dB
- INPUT IMPEDANCE (BALANCED / UNBALANCED) 20K/20K
- DAMPING FACTOR >40
- MAXIMUM OUTPUT (BALANCED / UNBALANCED) 8V Unbalanced
- BALANCED INPUT 1
- UNBALANCED INPUT 5
- PHONO INPUT MOVING COIL 1 (adjustable loading)
- PHONO INPUT MOVING MAGNET 1 (fixed loading)
- UPGRADEABLE DIGITAL AUDIO MODULE Yes
- DIGITAL COAXIAL INPUT 2
- DIGITAL OPTICAL INPUT 2
- DIGITAL MCT (DIN) INPUT 1
- DIGITAL USB INPUT 1
- BALANCED VARIABLE OUTPUT 0
- UNBALANCED FIXED OUTPUT 0
- UNBALANCED VARIABLE OUTPUT 2
- HEADPHONE OUTPUT 1/4" High Drive with Headphone Crossfeed Director (HXD®)
- AM/FM TUNER OPTION Included
- HOME THEATER PASSTHRU Yes
- UNBALANCED ANALOG CONNECTOR TYPE Standard
- SPEAKER BINDING POST TYPE Standard
- SERVICE PORT 1
- DIGITAL-TO-ANALOG CONVERTER (DAC) TYPE 8-channel, 32-bit/192kHz PCM/DSD, Quad Balanced
- DIGITAL COAXIAL INPUT SAMPLE RATE 24-bit/44.1kHz to 192kHz
- DIGITAL OPTICAL INPUT SAMPLE RATE 24-bit/44.1kHz to 192kHz
- DIGITAL MCT (DIN) INPUT SAMPLE RATE 16-bit/44.1kHz (CD)
- DSD64 (SACD) DIGITAL USB INPUT SAMPLE RATE
- 32-bit/44.1kHz to 384kHz (PCM)
- DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
- FM TUNING RANGE 87.9MHz - 107.9MHz (USA)
- 87.5MHz - 108.0MHz (Europe) 76MHz - 90MHz (Japan)
- FM CHANNEL SPACING
- 200kHz (USA)
- 50kHz (Europe50)
- 100kHz (Europe100, Japan)
- FM ANTENNA INPUT
- 75 ohms, Type “F” Coax connector
- FM ANALOG SPECIFICATIONS
- USEABLE SENSITIVITY 2.2uV (18.1dBf)
- 50DB QUIETING SENSITIVITY 1.5uV (14.8dBf)
- SIGNAL TO NOISE RATIO
- Mono: 70dB
- Stereo: 68dB
- FREQUENCY RESPONSE ±1dB 20Hz to 15,000Hz
- TOTAL HARMONIC DISTORTION
- Mono: 0.4%
- Stereo: 0.8%
- CHANNEL SELECTIVITY
- 60dB Adjacent Channel
- 66dB Alternate Channel
- STEREO SEPARATION 38dB
- AM GENERAL SPECIFICATIONS
- AM TUNING RANGE
- 530kHz - 1720kHz (USA)
- 522kHz - 1602kHz (Europe)
- 522kHz - 1611kHz (Japan)
- AM CHANNEL SPACING
- 10kHz (USA)
- 9kHz (Europe, Japan)
- AM ANTENNA INPUT
- Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
- AM ANALOG SPECIFICATIONS
- SELECTIVITY
- 45dB Adjacent Channel
- SIGNAL TO NOISE RATIO 50dB
- FREQUENCY RESPONSE 0dB, -6dB 50Hz to 3,000Hz
- TOTAL HARMONIC DISTORTION 0.5%
- SENSITIVITY 350uV/m
- TONE CONTROLS Bass and Treble
- TONE BYPASS AND INPUT ASSIGN Yes
- RS232 CONTROL INPUT Yes
- POWER CONTROL OUTPUT 1 Main, 2 Trigger
- REAR PANEL DATA PORT 4
- REAR PANEL IR SENSOR INPUT Yes
- INPUT LEVEL MATCH Yes
- VACUUM TUBE OR SOLID STATE Solid State
- OUTPUT AUTOFORMER Yes
- OUTPUT METERS Yes
- DUAL LAYER CHASSIS Yes
- CHASSIS FINISH Black painted steel
- MCINTOSH MONOGRAMMED HEATSINKS™ Yes
- POWER REQUIREMENT 120V 50/60Hz, 4.4 amps
- STANDBY POWER REQUIREMENT <0.25 Watts
- DIMENSIONS (W X H X D) 44.45cm x 19.37cm x 55.88cm
- WEIGHT 34.1 kg
- SHIPPING WEIGHT 42.3 kg
