The R-51PM powered speakers use a highly efficient, powerful yet minimalist design that engulfs listeners in their favorite movies and music. With a built-in amplifier, multitude of inputs and Bluetooth® connectivity, the R-51PM is the most versatile stereo speaker system on the planet.
Features:
Built-in All-Digital Amplifier
1" Aluminum LTS tweeters
90x90 Square Tractrix Horns
Dual 5.25" Spun-Copper IMG Woofers
Bass-Reflex via Rear-Firing Port
Strong, Flexible Removable Magnetic Grille
Dimensions: 13.3" x 7" x 8.5"

SYSTEM DESCRIPTION Powered Monitor (pair)

FREQUENCY RESPONSE 68Hz - 21kHz

DYNAMIC BASS EXTENSION 49Hz @ 35% Volume

MAX OUTPUT 107.3 dB

TOTAL SYSTEM POWER 120W Total System Power (140W Peak)

60W per channel cont. @ <%1 THD

HIGH FREQUENCY DRIVER 1” (2.5cm) Aluminum diaphragm compression driver mated

to 90° x 90° square Tractrix® horn

LOW FREQUENCY DRIVER 5.25” (13.3cm) copper spun magnetically shielded IMG woofer

CROSSOVER FREQUENCY 1663 Hz (Passive)

ENCLOSURE MATERIAL MDF

ENCLOSURE TYPE Bass-reflex via rear-firing port

INPUTS

• Bluetooth® wireless technology

• Phono/Line analog (with switch and ground screw terminal)

• 3.5mm analog mini jack

• USB digital

• Optical digital

OUTPUTS Single RCA line level output for connection to subwoofer

HEIGHT, WIDTH, DEPTH 13.3” (33.8 cm), 7” (17.78 cm), 9.12” (23.16 cm)

WEIGHT 10.6 lbs (4.8 kg)

FINISH Black

VOLTAGE 100V-240V 50/60Hz internal power supply with region specific

power cords

INCLUDED ACCESSORIES

• Remote control (with 2 x AAA batteries)

• 4M speaker wire with soldered tips

• 2M power cord (region specific)

• 2M USB Type A

Patefonas Reloop TURN2 , adata Ortofon OM10 

The precise belt drive on the TURN2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

The TURN2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

FEATURES

• Belt-driven Hi-Fi turntable
• Factory fitted with Ortofon OM10 cartridge
• New straight tonearm design with optimal tracking performance
• Manual arm lift
• Low vibration DC motor
• Integrated motor control with Speed-Switch for conveniently selecting two different speeds 33 / 45 rpm
• External DC power supply
• Die-cast Aluminum Platter with chrome edging
• Anti-Skating Wheel-System
• Gold-plated, corrosion resistant connections (all cables detachable)
• Slim-line wooden Plinth with mat black finish
• Convenient power switch at the side bottom
• Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL SPECIFICATIONS

Turntable Section:

• Type: Belt-Driven Analogue Turntable System
• Drive: Belt drive
• Motor: DC Motor
• Turntable Speeds: 2 speeds (33 1/3, 45)
• Wow and flutter: 0.2% WRMS
• S/N Ratio: >65 dB (a-weight)

Tonearm Section:

• Type: Static Balanced Straight Tonearm
• Effective Length: 224mm
• Overhang: 19mm
• Tracking Error Angle: 25°
• Tracking Force: 1.5g
• Applicable Cartridge Weight: 4~6g
• Anti-Skating Range: 0 – 3g

Turntable Platter:

• Material: aluminium die-cast
• Diameter: 300mm
• Weight: 550g

General:

• Power supply: DC 12V, 500mA
• Power Consumption: 6W
• Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
• Weight: Approx. 4.6kg

Terminals:

• 1x PHONO Out (gold-plated)
• 1x GND Earth Terminal

Included Accessories:

• Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell