Audison Bit Ten D garso DSP procesorius

Audison Bit Ten D  garso DSP procesorius 

bit Ten D is a multi-function digital processor conceived and built to process digital and analogue signal both on the input and on output to the amplifier (featuring AD Link connection) and create top-performance system with any source typology.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten D processes the signal with extreme accuracy and wide configurability thanks to a software especially designed for car acoustic peculiarities.
bit Ten D features an optical digital input, minimizing interference and degradations of the signal found in traditional analog interconnects, also by-passing the A/D conversion phases of analog signals.
Thanks to the AD Link connection, the available outputs become 8 in total, all in digital format; they can also be used simultaneously with the analog ones (for a maximum of 8 outputs total).
The AC Link is completely dedicated to the “remote control” of the system. The system is comprised of one connector for the provided DRC and one for the amplifiers present in the system. The DRC is supplied with the bit Ten D product.

Voltage 11 ÷ 15 VDC

Idling current 0.4 A

Switched off without DRC 2.5 mA

Switched off with DRC 4 mA

Remote IN voltage 7 ÷ 15 VDC (1.3 mA)

Remote OUT voltage 12 VDC (130 mA)

High Level (Speaker) FL - FR - RL - RR - PHONE IN

Low Level (Pre) AUX IN

Digital Optical IN (S/PDIF max 96 kHz/24 bit) OPTICAL IN

Low Level Pre (Default) FRONT L/R, REAR L/R, SUB

Digital AD Link Ch 1 ÷ Ch 8 S/PDIF

From / to personal computer 1 x USB / B (1.1/2.0)

To Audison Electronics AC Link controls

Distortion-THD @ 1 kHz, 1V RMS Output 0.005 %

Bandwidth @ -3 dB 10 ÷ 22k Hz

S/N Ratio @ weighted

Digital Input 105 dBA

Master Input 95 dBA

Aux Input 96 dBA

Channel Separation (@1 kHz) 85 dB

Input sensitivity (Speaker IN) 2 ÷ 15 V RMS

Input sensitivity (AUX in) 0.6 ÷ 5 V RMS

Input sensitivity (PHONE) 2 ÷ 15 V RMS

Input impedance (Speaker IN) 2,2 kΩ

Input impedance (AUX) 15 kΩ

Input impedance (PHONE) 2,2 kΩ

Max Output Level (RMS) @ 0.1% THD 4 V RMS

Mode Full / High Pass / Low Pass / Band Pass

Type and slope Linkwitz @ 12/24 dB

Butterworth @ 6/12/18/24 dB

Crossover frequency 68 steps @ 20 ÷20k Hz

Phase control 0° ÷180°

Hi-Level Input (Speaker In) Automatic De-Equalization

Outputs N.5 Graphic: ± 12 dB @ 31 Band ISO 1/3 Oct. 20 ÷ 20k Hz

Distance 0 ÷ 510 cm / 0 ÷ 200.8 in.

Delay 0 ÷ 15 ms

Step 0,08 ms; 2,8 cm / 1.1 in.

Fine set 0,02 ms; 0,7 cm / 0.27 in.

W x H x D (mm / in.) 191 x 34 x 131 / 7.51 x 1.33 x 4.76

Weight (kg / lb.) 0,6 /1.322